性一交一乱一伦一色一情,亚洲综合色区在线播放2019,国产成人精品午夜视频,欧美顶级metart裸体全部自慰

News Center

Location: Home >News Center

News Center

Recommend

Contact Us

Jiangsu Xinhantong Intelligent Electrical Technology Co., Ltd

Tel: 0511-80303080

Fax: 0511-80303081

Address: No.1 Chaoyang North Road, Chengbei Science and Technology Industrial Park, Sanmao Street, Yangzhong City

Bridge construction matters

2023-10-09
710次

1、 Construction

Measurement and positioning → Support and hanger manufacturing device → Bridge device → Grounding treatment

2、 Construction methods and skill methods

(1) Measurement and positioning: Use the line snapping method to mark the equipment position of the bridge, determine the fixed position of the bracket, and mark it correctly. Composite cable tray is the second generation product in the cable tray series and a new type of cable tray. It is suitable for laying various projects, units, and cables. It has the characteristics of simple structure, flexible configuration, convenient installation, and novel form. The positioning of the bridge in the vertical shaft should first use the suspension line method to determine the device reference line. If the reserved hole is not suitable, it should be adjusted and repaired in real time.

(2) Bracket manufacturing device

(3) According to the construction drawing design elevation and bridge specifications, locate and manufacture the bracket based on the measured dimensions. These brackets are produced in the factory. All components of the cable tray need to be galvanized and installed on the outdoor tray outside the building. The full name of a rigid structural system, including straight sections, elbows, tees, groove types, tray or stepped cross sections, as well as support arms, hangers, etc., which have tightly connected support cables. Slot type cable tray, also known as slot type cable tray, is a fully enclosed cable tray suitable for laying computer cables, communication cables, thermocouple cables, and other control cables for high sensitivity systems. It has good effects on shielding control cables from interference and protecting cables in highly corrosive environments. There is no ceiling beam bottom lifting or wall support device, but there is a ceiling internal lifting or wall support device. In public places without suspended ceiling, connect structural members, and take into account the beauty and convenience of construction and maintenance, use wall or column support devices or install them on the bottom chord members of Truss roof. The bracket of the wall mounted device is fixed with expansion bolts, and the spacing between the brackets does not exceed 2 meters. Supports and hangers should be added at the intersection of straight and non straight sections, at the deformation joints of buildings, and in the middle of non straight sections with a bending radius greater than 300mm. The support and hanger device should ensure that the degree or verticality of the bridge meets the requirements.

(4) Bridging device

① Regarding the extraordinary appearance of the bridge, the dimensions measured on-site will be handed over to the means supplier, who will manufacture based on the dimensions and reduce on-site processing. The material, model, thickness, and accessories of the bridge meet the design requirements.

② Before installing the bridge, it is necessary to coordinate with various specialties to prevent conflicts between large diameter fire pipes, sprinkler pipes, hot and cold water pipes, drainage pipes, as well as air conditioning and exhaust equipment.

③ Lift the bridge to the predetermined position and secure it to the bracket with bolts. Carefully check the dimensions at the turn. The slope of this bridge should be the same as the slope of the building. For bridges on curved building walls, the curved shape should be consistent with the building. The bridge is connected to the bridge through a connecting plate, and the connecting bolt is a half round head bolt, which is located on the inner side of the bridge. The cracks between cable trays must meet the design requirements to ensure that the cable trays of the system are integrated.

④ Bridges crossing deformation joints in buildings should be treated as expansion joints in accordance with the enterprise standard "Special Steel Cable Tray Installation Technology". When the straight section of the steel bridge exceeds 30m, a thermal expansion compensation device should be installed.

⑤ The bridge device is horizontal and vertical, with a uniform and beautiful appearance


contact us

Jiangsu Xinhantong Intelligent Electrical Technology Co., Ltd

Tel: 0511-80303080

Fax: 0511-80303081

Address: No.1 Chaoyang North Road, Chengbei Science and Technology Industrial Park, Sanmao Street, Yangzhong City

国产午夜理论不卡在线观看 | 免费人成网ww555kkk在线| 国产欧美日韩视频怡春院| 97无码免费人妻超级碰碰夜夜| 少妇裸体性生交| 成人无码av免费网站| 毛片免费全部无码播放| 天天爱天天做天天爽| av天堂亚洲区无码小次郎| аⅴ资源天堂资源库在线| 人妻夜夜爽天天爽三区丁香花 | 影音先锋每日av色资源站| 成人毛片无码一区二区三区| 亚洲精品国产二区图片欧美| 国产人与zoxxxx另类| 色偷偷av男人的天堂| 久久99国产精品尤物| 亚洲春色在线视频| 高清av熟女一区| 国产av丝袜一区二区三区| 成人亚洲a片v一区二区三区麻豆 | 麻豆一区二区99久久久久| 国产精品国语对白露脸在线播放 | 少妇人妻在线无码天堂视频网| 国产午夜激无码av毛片| 国产色在线 | 国产| 亚洲综合激情另类小说区| 国产成人亚洲精品| 夜夜爽77777妓女免费看| 99精品久久毛片a片| 亚洲欧美综合在线一区| 手机看片久久国产永久免费| 强开少妇嫩苞又嫩又紧九色| 亚洲成在人线av无码| 日本做受高潮好舒服视频 | 人人爽人妻精品a片二区| 欧亚精品一区三区免费| 亚洲欧洲日本精品专线| 久久精品国产丝袜人妻| av人摸人人人澡人人超碰小说| 国产日韩久久免费影院|